1. The injection equipment and the mold locking equipment are on the same straight center line, and the mold is opened and closed along the up and down directions. The floor area is only about half of that of the horizontal machine. Therefore, the productivity converted into floor area is about twice.
2. Simply complete the insert molding. Because the mold surface is upward, it is easy to put the insert into position. If the lower formwork is fixed and the upper formwork is movable, the fully active insert molding can be simply completed by combining the belt conveyor with the manipulator.
3. The component of the mold is supported by the horizontal formwork to open and close up and down, which will not cause the front fall caused by the gravity of the mold similar to the horizontal machine, making the formwork unable to open and close. It is beneficial to persistently adhere to the accuracy of machinery and molds.
4. Each plastic part cavity can be taken out by a simple manipulator, which is conducive to precision molding.
5. Generally, the mold locking equipment is open around, and various kinds of active equipment are simply configured, which is suitable for the active forming of disordered and exquisite products.
6. The belt drawing and conveying equipment simply completes the string passing through the mold center device, which is convenient to complete the forming and active production.
7. Simply ensure the consistency of resin fluidity and mold temperature distribution in the mold.
8. It is equipped with rotating table top, moving table top and skewed table top to simply complete insert molding and in mold combined molding.
9. In small batch trial production, the die structure is simple, the cost is low, and it is easy to unload.
10. After repeated earthquake detection, the vertical machine has better seismic resistance than the horizontal machine because of its low center of gravity.
